Descripción

Our polishing compound smooths, refines and clarifies compounded paint surface. It’s body shop proven, works with any buffer or pads, and can be used as a follow-up to other compounds as well as a stand-alone product. To use, just apply a 5-inch ribbon to the pad, then set the buffer speed to medium or medium-high. Start off slowly and rest the pad on the surface, using just the weight of the machine without placing any more pressure on it. Work on a small section at a time, overlapping each one to make sure you’re evenly covering the entire surface, and move the pad in at least 3 different directions as you go. If needed, apply more of the polishing compound to ensure the working surface is wet at all times. Finish it off with a spritz of instant detailer and use a soft, clean microfiber towel to wipe the polish off. Flip the cloth over using a clean surface as you wipe. Finally, inspect the surface to see if you’ve missed any spots. When you’re all done with the polishing compound, you’ll be left with a smooth, clean, defect-free surface that’s ready to be waxed.